Yokogawa ADMAG AXR Two-wire Magnetic Flowmeters AXR200G
GENERAL DESCRIPTION
The ADMAG AXR two-wire magnetic Flowmeter can be installed in the two-wire system without any AC power source, thus drastically reducing the initial instrumentation cost.
The ADMAG AXR is the world’s frst two-wire magnetic Flowmeter which employs the Fluid noise free “Dual Frequency Excitation Method,” achieving excellent stability for instrumentation.
Like the AXF four-wire magnetic Flowmeter series, the ADMAG AXR has user-friendly functions such as a full dot-matrix LCD indicator, electrode adhesion level diagnosis function, and a multi-lingual display.
The magnet switches can be used for checking and setting parameters without opening the case cover
User-friendly Functionality
Enhanced Diagnostic Function By checking the level of the insulating substance on the electrodes, it is possible to determine when maintenance is required.
Results of mean Flow measurement during a given period, etc. can be checked by using parameters.
Clear and Versatile Indications
The full dot-matrix LCD indicator facilitates various displays such as one to three lines and multi-lingual
display.
In an alarm condition, a full description of the countermeasure is indicated.
Parameter Setting
Magnet switches and push switches are employed.
Magnet switches enable parameters to be set without opening the case cover in the hazardous area.
Various Output Signals
In addition to the current output, one output can be selected among pulse, alarm, and status.
Various functions such as multiple-range, forward and reverse Flow measurement, and Flow rate upper/lower
limit alarm are achieved.
The pulse output is a highspeed of 10,000 pps (pulses per second).
Functions
How to Set Parameters (*2):
Both of four push buttons and magnet switches can be used for setting. The magnet switches can be used to set parameters without opening the case cover.
The magnet switches need operational magnets (optional code BM). These are also available as part number F9840PA.
Users can choose a language on indicator from English, Japanese, German, French, Italian, and Spanish. Parameters can also be set with the confguration tool (Such as HHT (handheld terminal) or FieldMate, etc.). The language for the HHT is English only.
